• Horsepower: 130hp (97kW)
• Number of Cylinders: 6 cylinder Diesel - No Computers
• Engine Type: Usually a turbocharged and intercooled diesel engine for efficient power delivery and emissions compliance.
• Displacement:
• Torque:
• Emissions Standards: Tier 2

‍

• Horsepower: 130hp (97kW)
• Number of Cylinders: 6 cylinder Diesel - No Computers
• Engine Type: Usually a turbocharged and intercooled diesel engine for efficient power delivery and emissions compliance.
• Displacement:
• Torque:
• Emissions Standards: Tier 2

‍

Drivetrain Components:

• Heavy-duty clutch: Ensures smooth and reliable power transfer between the engine and transmission, able to handle the high torque output of the 260hp engine.
• Drive axles: Likely constructed with heavy-duty components like reinforced gear sets and final drives to withstand demanding workloads and uneven terrain.
• Cardan shafts: Connect drivetrain components and transmit power efficiently, designed for durability and minimal maintenance.

Final Drive Options:

• ‍4WD (four-wheel drive) for enhanced traction and off-road capability. Some models might have selectable 4WD modes for different driving conditions.
• Planetary reduction gears within the final drives provide additional torque multiplication, amplifying the engine's power to the wheels for pulling heavy loads or navigating difficult terrain.
• Coaro Front Axle

‍

1. Steering Wheel: Controls the direction of the tractor. Most models will have power steering for easier handling.
2. Gear Shift Lever: Selects the desired gear range (e.g., forward, reverse, neutral) and speed. May have multiple gear ranges depending on the specific model.
3. Accelerator Pedal: Controls the engine speed and, consequently, the tractor's forward speed. Some models may have a separate foot throttle for operating implements at different speeds.
4. Brake Pedals: There are typically two brake pedals: one for each side of the tractor. Pressing both simultaneously applies the parking brake.
5. Hydraulic Control Levers: These levers control the various hydraulic functions, such as raising/lowering the three-point hitch, operating a front-loader or other implements. The specific layout and functions of these levers will vary depending on the model and its capabilities.
6. PTO Lever: This lever engages/disengages the Power Take-Off (PTO) shaft, which provides power to implements like mowers, balers, and chippers.
7. Differential Lock Lever: This lever engages/disengages the differential lock, which improves traction in slippery or uneven terrain.
8. Dashboard Instruments: The dashboard typically displays information such as engine speed, fuel level, hydraulic pressure, and various warning lights.

‍

AG Tyres

‍

‍

Steering Wheel: This controls the direction of the tractor and will likely have power steering for effortless handling, especially at higher speeds.

2. Gear Shift Lever: This selects the desired gear range (e.g., forward, reverse, neutral) and speed. The 260hp model might have additional functionalities like high/low ranges or multiple gearboxes for optimal power distribution.

3. Accelerator Pedal: This controls the engine speed and, consequently, the tractor's forward speed. Some models may have a separate foot throttle for operating implements at different speeds than the tractor itself.

4. Brake Pedals: Two brake pedals: one for each side of the tractor.

5. Hydraulic Control Levers: These levers control the various hydraulic functions, such as raising/lowering the three-point hitch, operating a front-loader or other implements.

6. PTO : 2 speed

7. Differential Lock Levers:  Engaging/disengaging the differential locks for both front and rear axles for improved traction in challenging terrain.

9. Display Panel: A digital display panel typically shows information like engine speed, fuel level, hydraulic pressure, PTO speed, implement status, and various warning lights.

‍

‍

Optional front end Loader

4in1 Bucket

Self Level Lift Design

Euro Mount Hitch